RUET-Rajshahi University of Engineering & Technology.

Books (3)

1. M.E.Hoque, D.K. Saha and D. Rakshit; "IoT-based intelligent solar energy harvesting technique with improved efficiency", In Artificial Intelligence and Internet of Things for Renewable Energy Systems, Neeraj Priyadarshi (Ed.), De Gruyter, Germany, DOI: 10.1515/9783110714043-009, 2021
2. Hoque, M. E.; "Active Flutter Control - Basics, Analysis and Application to Rotating Disks", LAP Lambert Academic Publishing AG & Co. KG, Germany, ISBN: 978-3-8383-6851-1, 2010
3. Hoque, M. E. and Mizuno, T.; "Magnetic Levitation Technique for Active Vibration Control", in Magnetic Bearings, Theory and Applications, Bostjan Polajzer (Ed.), Sciyo Publications, Croatia, ISBN 978-953-307-148-0, 2010

Book Chapters (2)

1. Hoque, M. E. and Rashid, F.; "Gasification Process Using Downdraft Fixed-Bed Gasifier for Different Feedstock", Gasification, Valter Silva (Ed.), Intechopen Publications, Croatia, ISBN 978-1-83968-796-9, DOI: 10.5772/intechopen.96227, 2021
2. Hoque, M. E. and Rashid, F.; "Co-Pyrolysis of Biomass Solid Waste and Aquatic Plants", Gasification, Valter Silva (Ed.), Intechopen Publications, Croatia, ISBN 978-1-83968-796-9, DOI: 10.5772/intechopen.96228, 2021

Journal Articles (42)

1. M. R. Ahmed, M.R. Hasan, T.Barua and M. E. Hoque; "Techno-economic and feasibility investigation of standalone renewable energy-based hybrid systems with battery and hydrogen storage", Next Research (Elsevier), Volume 2, Issue 3, September 2025, 100720, https://doi.org/10.1016/j.nexres.2025.100720, 2025
2. M.R.Hasan, T. Rashid, M.E.Hoque, M. Aziz, M.S.Hossain; "Dispersion Stability of a Water-based Ternary Hybrid Nanofluid with Al2O3, CuO, and Graphite: An Experimental and RSM Modeling Approach", Next Research (Elsevier), Vol. 2, No. 3, 2025, https://doi.org/10.1016/j.nexres.2025.100594, 2025
3. S. Dutta , M. N. U. Khan , M. E. Hoque, et. al.; "Sustainable Diesel Engine Performance Enhancement Using Pyrolytic Plastic Oil Blends: Experimental Investigation and Artificial Neural Network-Based Prediction", Energy (Elsevier, Q1), Vol. 133C, No. 137469, 2025 https://doi.org/10.1016/j.energy.2025.137469, 2025
4. S. M. R. Rasid, M. A. Kader, M. M. Z. Shahadat, M. E. Hoque, T. Mizuno; "Active Vibration Isolation System with Active Dynamic Vibration Absorber Using Kalman Filter Estimated Acceleration Feedback", Journal of Engineering and Applied Science, vol. 8, no. 2, pp. 72-80, 2024, 2024
5. S. Rahman, M. M. Ahmed, P. K. Hopke, M. E. Hoque, et. al.; "Impact of COVID-19 on Air Quality in Major Cities of Bangladesh: A Temporal Analysis (2018-2023)", Earth Systems and Environment (Springer Nature, Q1, Citescore=13, IF=5.3), https://doi.org/10.1007/s41748-024-00506-w, 2024
6. Hossain, M.A., Rashid, F., Akhter, M.S., Aziz, M., and Hoque, M.E.; "Liquid Fuel Generation from Onion Shell: An Experimental Approach of Pyrolysis Process", Energies (MDPI, Q1) 2024, 17, 2171. https://doi.org/10.3390/ en17092171, 2024
7. Md. Ramim-Ul Hasan, Tanjimur Rashid, Hridoy Bhadra, Mohammad Mehedi Hasan, Md. Omar Faruq, Fazlur Rashid, and Md. Emdadul Hoque; "Managing Blended Human-Robot Collaboration (HRC) Challenges in Industrial Systems: A Review", Journal of Engineering and Technology, vol. 16, no. 1, pp. 14-25, 2024, 2024
8. D. Saha, M. E. Hoque and M.E.H.Chowdhury; "Enhancing Bearing Fault Diagnosis Using Transfer Learning and Random Forest Classification: A Comparative Study on Variable Working Conditions", IEEE Access (IEEE, Q1, IF 3.9), vol. 12, pp. 5986-6000, 2024, doi: 10.1109/ACCESS.2023.3347345., 2024
9. N. Sakib, M. E. Hoque, et al.; "Effects of Dispatch Algorithms and Fuel Variation on Techno-Economic Performance of Hybrid Energy System in Remote Island", Journal of Energy Storage (Elsevier, Q1, IF 9.4), Vol. 78C, No. 109919, 2024, https://doi.org/10.1016/j.est.2023.109919, Share Link: https://authors.elsevier.com/a/1iOUs,rUrFq8rU, 2024
10. M. R. Ahmed, M. R. Hasan, S. Hasan, M. Aziz and M. E. Hoque; "Feasibility Study of the Grid-Connected Hybrid Energy System for Supplying Electricity to Support the Health and Education Sector in the Metropolitan Area", Energies (mdpi/Q1/ IF 3.2), Vol. 16, No. 4, paper ID. 1571, 2023, https://doi.org/10.3390/en16041571, 2023
11. Arifur Rahman, Md. Emdadul Hoque, Fazlur Rashid, Firoz Alam and Mim Mashrur Ahmed; "Health Condition Monitoring and Control of Vibrations of a Rotating System through Vibration Analysis", Journal of Sensors (Q2/IF 2.336), Vol. 2022, Article ID 4281596, pp. 1-12, 2022. https://doi.org/10.1155/2022/4281596, 2022
12. D.K. Saha, M.E.Hoque, and H. Badihi; "Development of Intelligent Fault Diagnosis Technique of Rotary Machine Element Bearing: A Machine Learning Approach", Sensors (mdpi/Q1/IF-3.576), Vol.22, No. 3: 1073. https://doi.org/10.3390/s22031073, 2022
13. M. M. Ahmed, M. E. Hoque, S. Rahman, P. K. Roy, F. Alam, M. M. Rahman, M. M. Rahman and P. K. Hopke; "Prediction of COVID-19 Cases from the Nexus of Air Quality and Meteorological Phenomena: Bangladesh Perspective", Earth Systems and Environment (Springer Nature, Q1, IF 9.11), vol. 6, pp. 307-325, 2021, https://doi.org/10.1007/s41748-021-00278-7, 2021
14. Rashid, F., Hoque, M. E., Aziz, M., Sakib, N., Islam, M.T., and Robin, M.R.M.; "Investigation of optimal hybrid energy systems using available energy sources in a rural area of Bangladesh", Energies (Q1, IF-3.2), Vol.14, No. 18, Paper ID: 5794, doi: https://doi.org/10.3390/en14185794., 2021
15. Hussam, W.K., Nabi, M.N., Chowdhury, M.W., Hoque, M.E., Rashid, A.B., and Islam, M.T.; "Fuel property improvement and exhaust emission reduction, including noise emissions using an oxygenated additive to waste plastic oil in a diesel engine", Biofuels, Bioproducts & Biorefining (Wiley, IF=5.239), Vol. 15, No. 6, pp. 1650-1674, DOI: 10.1002/bbb.2262, 2021
16. Habib, M.A., M. M. Ahmed, Aziz, M., Beg, M.R.A., and Hoque, M. E.; "Municipal Solid Waste Management and Waste-to-Energy Potential from Rajshahi City Corporation in Bangladesh", Applied Sciences (MDPI/Q1/IF 2.474), Vol.11, No.9, paper ID. 3744, doi: https://doi.org/10.3390/app11093744, 2021
17. Hoque, M. E., Rashid, F., and Aziz, M.; "Gasification and Power Generation Characteristics of Rice Husk, Saw Dust, and Coconut Shell Using a Fixed-Bed Downdraft Gasifier", Sustainability (MDPI/Q2/IF 2.576), Vol.13, No.4, paper ID. 2027, doi: https://doi.org/10.3390/su13042027, 2021, 2021
18. Hossain, M. B., Hoque, M. E., Rashid, F., Mizuno, T. and Ishino, Y.; "Development of a Cost Effective Magnetic Levitation System Using PIC12F683 Microcontroller and Photo sensor", International Journal of Scientific Research and Engineering Development, Vol. 3, No. 1, pp. 351-358, 2020
19. Hossain, M. B., Hoque, M. E. and Islam, M.R.; "Development of a Magnetic Suspension System Using PD Controller", International Journal of Mechatronics and Manufacturing Technology, Vol. 5, No.1, pp. 1-13, 2020
20. Rahman, A., Hoque, M. E., Noor, S.S.; "Investigation of Machinery Health Analysing Characteristics of Vibration Using Comprehensive Experimental Setup", International Journal of Scientific Research and Engineering Development, Vol. 2, No. 3, pp. 355-361, 2019
21. Shahadat, M.M.Z., Hoque, M.E., Mustafi, N.N., and Mizuno, T.; "Improvement of Transient Behavior of a Displacement Cancellation Controlled System with Feedforward Control", Journal of Engineering and Applied Science, Vol. 3, No. 2, pp. 66-75, 2019
22. Rasid, S.M.R., Hossain, M. B., Hoque, M. E., Azam Arif, M.A. and Sarder, M.S.A.; "Modeling and Control of a Magnetic Suspension System Using an Analog Controller", Acta Electronica Malaysia, Vol. 3, No.2, pp. 41-44, 2019
23. Rubel, R.I., Iqbal, M.J., and Hoque, M. E.; "FEA of Locally Found Mild Steel for Constructing Propeller Shaft of CNG Driven Three-Wheeler", Journal of Mechanical Engineering and Biomechanics, Vol. 3, No. 3, pp. 14-24, 2018
24. Hoque, M.E., Mourshed, M., Rashid, F., Sarkar, A., and Alam, R.; "Single Degree of Freedom Motion Control of a Magnetically Suspended Object Using Analog Controller", DUET Journal, vol. 3, Issue 1, pp. 51-55, 2017
25. Mahmood, A.A., Gafur, M.A. and Hoque, M.E.; "Effect of MgO on the Physical, Mechanical and Microstructural Properties of ZTA-TiO2 Composites", Materials Science &Engineering A (Elsevier), vol. 707, pp. 118-124, 2017
26. Mahmood, A.A., Gafur, M.A. and Hoque, M.E.; "Surface Properties Modification of Zirconia Toughened Alumina by Using Titania Additives", Colloids and Surface Science, Vol. 2, No. 1, pp. 1-5, 2017
27. Roy, A., Hoque, M.E., Islam, M. S., Sarker, M. R.I., and Das, B.K.; "Energy Enhancement of Two Pass Solar Collector with Steel Matrix in the Region of Rajshahi, Bangladesh", International Journal of Mechanical Engineering and Automation, Vol. 4, No. 2, pp. 73-78, 2017
28. Ahmed, M., Hossen, M. F., Hoque, M.E., Farrok, O. and Mynuddin, M.; "Design and Construction of a Magnetic Levitation System Using Programmable Logic Controller", American Journal of Mechanical Engineering, Vol. 4, No. 3, pp. 99-107, 2016
29. Rubel, R.I., Iqbal, M.J., and Hoque, M. E.; "Analysis of a CNG Driven Three Wheeler Drive Shaft", Applied Mechanics and Materials, Vol. 860, pp. 93-98, 2016
30. Islam, M.N., Sabur, A., Ahmmed, R., and Hoque, M. E.; "Oil Extraction from Pine Seed (Polyalthia longifolia) by Solvent Extraction Method and its Property Analysis", Procedia Engineering (Elsevier), Vol. no. 105, pp. 613-618, 2015
31. A. Rahman and Hoque, M. E.; "Prospects of Harvesting Energy from Vibration in Bangladesh", Procedia Engineering (Elsevier), Vol. no. 90, pp. 166-171, 2014
32. P.K. Halder, N. Paul, M. E. Hoque, A. S. M. Hoque, M. S. Parvez, Md. H. Rahman, M. Ali; "Municipal Solid Waste and its Management in Rajshahi City, Bangladesh: A Source of Energy", International Journal of Renewable Energy Research, Vol. 4, No. 1, pp. 168-175, 2014
33. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "A Modified Zero-Power Control and Its Application to Vibration Isolation System", Journal of Vibration and Control (SAGE Publications-USA), Vol. 18, No. 12, pp. 1788-1797, 2012
34. Billah, M. M., Rahman, A. A., Hoque, M. E., and Hossain, M. B.; "Harvesting Energy From Speed Breaker", International Journal of Energy Machinery, (KOCEN, Korea), Vol. 5, No. 1, paper no. KOCEN12J112, pp. 100-105, 2012
35. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "A Three-Axis Vibration Isolation System Using Modified Zero-Power Controller with Parallel Mechanism Technique", Mechatronics (Elsevier Ltd.) Vol. 21, No. 6, pp. 1055-1062, 2011
36. Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M.; "Application of Feedforward Control to a Vibration Isolation System Using Negative Stiffness Suspension", Journal of System Design and Dynamics (JSME-Japan), Vol. 5, No. 5, pp. 777-788, 2011
37. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "A Six-Axis Vibration Isolation System Using Active Zero-Power Control Supported by Passive Weight Support Mechanism", Journal of Sound and Vibration (Elsevier Ltd.), Vol. 329, No. 17, pp. 3417-3430, 2010
38. Hoque, M. E., Mizuno, T., Kishita, D., Takasaki, M., and Ishino, Y.; "Development of an Active Vibration Isolation System Using Linearized Zero-Power Control with Weight Support Springs", ASME Journal of Vibration and Acoustics (ASME-USA), Vol. 132, No. 4, paper no. 041006, 2010
39. Hoque, M. E., Takasaki, M. Ishino, Y., Suzuki, H. and Mizuno, T.; "An Active Microvibration Isolator with Zero-Power Controlled Magnetic Suspension Technology", JSME International Journal, Series C (JSME-Japan), Vol. 49, No. 3, pp. 719-726, 2006
40. Hoque, M. E., Mizuno, T., Takasaki, M. and Ishino, Y.; "A Nonlinear Compensator of Zero-Power Magnetic Suspension for Zero-Compliance to Direct Disturbance", Transaction of the Society of Instrument and Control Engineers (SICE-Japan), Vol. 42, No. 9, pp. 1008-1016, 2006
41. Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T.; "Development of a Three-Axis Active Vibration Isolator Using Zero-Power Control", IEEE/ASME Transactions on Mechatronics (IEEE-USA), Vol. 11, No. 4, pp. 462-470, 2006
42. Huang, X. Y., Hoque, M. E., and Wang, X.; "An Experimental Study on Feedback Control of Rotating Disk Flutter", Journal of Fluids and Structures, (Elsevier Ltd.), Vol. 20, pp. 71-80, 2005

Conference Papers (96)

1. P. P. Mondal , Z. R. Shaitee , F. A. Supty, M. E. Hoque; "Fabrication and Characterization of Bismuth Titanate Loaded PVDF/PMMA Nanocomposites for Piezoelectric Nanogenerator", In Proc. of 2nd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE – 2024), DUET, Gazipur, Bangladesh, Paper ID. 19, 29-31 May 2024, 2024
2. R. Karal, M. E. Hoque, M. Takrim, F. Sakib; "Diagnosis and Prediction of Bearing Fault by Deep Learning Approach With Envelope Analysis", In Proc. of the 6th International Conference on Mechanical, Industrial and Materials Engineering 2024, RUET, Rajshahi, Bangladesh, paper ID. 416, 11-13 December, 2024, 2024
3. S. Siddika, A. S. M. S. Rahman, M. E. Hoque; "Integrating Renewables Into Stand-alone Hybrid Energy System and Meeting Freshwater Demand By Utilizing Excess Energy", In Proc. of the 6th International Conference on Mechanical, Industrial and Materials Engineering 2024 (ICMIME2024), Paper ID. 526, 11-13 December, 2024, RUET, Rajshahi, Bangladesh., 2024
4. S.M. Takrim and M. E. Hoque; "Slurry Flow Electrodes Towards Scalable Environmental and Energy Storage Applications: State of the Art and Technical Challenges", In Proceeding of the 9th BSME International Conference on Thermal Engineering, BUET, Bangladesh, paper ID 304, 9-21 December 2024, 2024
5. M. I. Ahmmed, P. Mondol, M. E. Hoque; "Sizing Optimization of a Hybrid Power Supply System to Solve the Energy Crisis of an Off-Grid Island in Bangladesh", In Proc. of International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID. 275, 18-19 December, 2023, 2023
6. S. Dutta, M. N. U. Khan, and M. E. Hoque; "An Artificial Neural Network-based Model for Predicting Diesel Engine Performance and Emissions using Pyrolytic Plastic Oil Blend with Diesel Fuel", In Proc. of International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID. 289, 18-19 December, 2023, 2023
7. F Ahmed, U K Paul, M M Ahmed, D K Paul and M E Hoque; "Condition-Based Predictive Maintenance of Oil Wetted Machinery by In-service Oil Analysis: A Comprehensive Review", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 209, 2022
8. M M Ahmed, M A Zaman, M N Fariha and M E Hoque; "Oxidative Degradation Analysis of Engine and Gear Oil of An Automobile by FTIR Sprectroscopy", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 199, 2022
9. A Das, S D Piu, M E Hoque, A C Diganta; "Analysis of the Influences of Temperature, Solar irradiation, Reverse Saturation Current, Series Resistance, and Shunt Resistance on Solar Cell", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 216, 2022
10. M M Hasan, M A I Asik, and M E Hoque; "Energy, Exergy and Efficiency Analysis of Power Generation Sectors of Bangladesh", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 222, 2022
11. A Das, S D Piu, M E Hoque, A C Diganta and M Moitro; "Integration of Ion Transport Membrane with Conventional Powerplant to Obtain Pure Oxygen and More Efficient Power Production", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 214, 2022
12. A Akter, P Das S Hossain, A K M M Rahman, F Ifad, M Islam, S M R Uddin, M M Islam and M E Hoque; "Development of Budget-Friendly Sound Assisted Navigation System for People with Visual Impairment", In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 178, 2022
13. Islam, T., M. R. Ahmed, M. M. H. Mehedi, and Hoque, M. E.; "Numerical Investigation on Effect of Dimple Position on Symmetric Aerofoil at Higher Angle of Attack", In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 155, 12 – 14 December 2021, Chattogram, Bangladesh, 2021
14. Islam, T., M. M. H. Mehedi, M. S. B. Zaman, M. R. Ahmed, and Hoque, M. E.; "Numerical Investigation on Modified NACA 2412 Aerofoil with Sinusoidal Leading Edge and The Effect of Its Amplitude and Wavelength", In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 154, 12 – 14 December 2021, Chattogram, Bangladesh, 2021
15. T. Islam, M. S. B. Zaman, M. M. H. Mehedi, M. R. Ahmed, M. E. Hoque; "Numerical Investigation of Stress Development In Modified Tooth Polymer Gear With Fiber Reinforcement", In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 153, 12 – 14 December 2021, Chattogram, Bangladesh, 2021
16. M. E. Hoque, N. Sakib, F. Alam, M. M. Ahmed, F. Rashid and S. Chattopadhyaya; "Design and Optimization of a Hybrid Energy System for Sustainable Development at Rural Areas in Bangladesh", In Proceedings of the 3rd International Conference on Energy and Power, Chiang Mai, Thailand, Paper ID. 103, 18-20 November, 2021, 2021
17. D. K. Saha and M. E. Hoque; "Fault Classification of Deep Groove Ball Bearing using Multi-Class Support Vector Machine with One Versus All Approach", International Conference on Mechanical Engineering and Renewable Energy (ICMERE), CUET, Bangladesh, Paper ID. 86, 12-14 December, 2021, 2021
18. Hoque, M. E., Ahmed, M.M., Rahman, A., and M. S. Zaman; "A Review on Condition Monitoring of Automobile IC Engine Through Used Oil Analysis", in Proceeding of the 6th International Conference on Engineering Research, Innovation and Education 2021, Paper ID. 117, 26-28 February, 2021, SUST, Sylhet, Bangladesh., 2021
19. Hoque, M. E., Ahmed, M.M., and Rahman, A.; "Condition Monitoring of An Automobile IC Engine and Gearbox Through Used Oil Analysis", In CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Bangladesh, Paper ID. ICMIEE20-067, 19-21 December, 2020, 2020
20. Saha, D. K. and Hoque, M. E.; "Vibration Based Fault Diagnosis of Spur Gear Operating Under Constant Speed Using Time Synchronous Averaging Method", in CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Paper ID. ICMIEE20-229, Bangladesh, 19-21 December, 2020, 2020
21. Ahmed, S., Hoque, M. E., and Saha, D.K.; "Remaining Useful Life Prediction of a Motor Gear Test Rig using Autoencoder and Gated Recurrent Unit", in CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Bangladesh, Paper ID. ICMIEE20-231, 19-21 December, 2020., 2020
22. Ferdous, O., Sultana, M.M., and Hoque, M. E.; "Optimization of Link-Based Power Transmission System Designed for Offset Parallel Shaft Arrangemnet", In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-15, 17-19 December, 2019, 2019
23. Hossain, M. B., Hoque, M. E., Mizuno, T. and Ishino, Y.; "Development of a Solar Magnetic Suspension System Using PD Controller", In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-13, 17-19 December, 2019, 2019
24. Roy, P.N., Armin, M., Kamruzzaman, S.M., and Hoque, M.E.; "A Supervisory Control of Home Appliances Using Internet of Things", In CD-ROM Proceedings of the 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), CUET, Chattogram, Bangladesh, Paper ID. 5671089, 7-9 February, 2019, 2019
25. Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F.; "A Numerical Comparative Study on Heat Generation Pattern for Different Materials Based on Eigenfrequencies", In CD-ROM Proceedings of the International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID.194, 18-20 December, 2019, 2019
26. Ferdous, O., Sultana, M.M. and Hoque, M. E.; "Analyses of an Efficient Multi-angular Power Transmission Arrangement by Employing Kinematic Chain Joint Links", In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-237, 11-13 December, 2019, 2019
27. Hossain, M. B., Hoque, M. E., Mizuno, T. and Ishino, Y.; "Development of a Vertical Translation Magnetic Levitation System Using PIC12F683 Microcontroller", In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-214, 11-13 December, 2019, 2019
28. Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F.; "Investigating the Effect of Various Angles of Divergence of a Conical Rocket Nozzle During Boost Phase", In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-110, 11-13 December, 2019, 2019
29. Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F.; "A Numerical Comparative Study on Heat Generation Pattern for Different Materials Based on Eigenfrequencies", In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-109, 11-13 December, 2019, 2019
30. Akram, M.W., and Hoque, M. E.; "Towards the Potential Applications of Waste Heat Energy: A Review", In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-04, 17-19 December, 2019, 2019
31. Islam, T., Hoque, M. E., Rashid, F., and Zaman, M.S.B.; "Towards an Improved design of Solar PV/T Collector and Investigation on PV Cell Performance Coupled with Air Cooling System", In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-19, 17-19 December, 2019, 2019
32. Islam, T., Zaman, M.S.B., Rashid, F., and Hoque, M. E.; "Numerical Analysis of Solar Water Heater using Water-Glycerin Solution", In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-18, 17-19 December, 2019, 2019
33. Hoque, M. E., Rashid, F., and Das, P.; "Process Analysis and Gasification of Rice Husk by Using Downdraft Fixed Bed Gasifier", In CD-ROM Proceedings of the International Conference on Thermal Engineering, BUET, Dhaka, Bangladesh, Paper ID.215, 19-21 December, 2018, 2018
34. Hoque, M. E., Sayeed, S., Mursalin, R., Puja, P.C., and Insan, M.S.; "Realization of Infinite Stiffness Using PID Controller", In CD-ROM Proceedings of the International Conference on Computer, Communication, Chemical, Material and Electronic Engineering, RU, Rajshahi, Bangladesh, doi: 10.1109/IC4ME2.2018.8465590., 8-9 February, 2018., 2018
35. Hoque, M. E., Rashid, F., Prodhan, M.Y., Arman, A., Alum, M.A. and Islam, M.S.; "Analysis of Energy Consumption and Efficiency to Reduce Power Losses in Industrial Equipment", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID: 12, 20-22 December, 2017, 2017
36. Hoque, M. E., Hasan, M.J., and Hasan, M.K.; "Welding Joint Evaluation of Mild Steel Samples for Varying Current and Voltage to Reduce the Defect Using Non-Destructive Testing", In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. MS-248, 28-30 December, 2017, 2017
37. Ahmed, S., Serker, A., and Hoque, M. E.; "Design and Construction of a DC Motor Driven Agitator for Lab-scale Work Agitation Purposes", In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. RT-101, 28-30 December, 2017, 2017
38. Sami Ahbab Chowdhury, Shaikh Sumit Noor, Oishwarjya Ferdous, Md. Emdadul Hoque; "Prospects of Solar Powered Air Conditioning Systems in Bangladesh and Comparative Analysis with Conventional Systems", In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. TE-152, 28-30 December, 2017, 2017
39. Mhia Md. Zaglul Shahadat, Nirendranath Mustafi, Md. Emdadul Hoque and Takeshi Mizuno; "Transient Peak Reduction by Feedforward Control in Zero-compliance System with Displacement Cancellation Technique", In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-274, 28-30 December, 2017, 2017
40. Hoque, M. E., Rashid, F., Alam, J and Rahman, P.; "Development of Solar Oven with Automatic Tracking System", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017, 2017
41. Rashid, F., Hoque, M. E., Peash, K. I., Faisal, F., Alum, M.A., and Islam, M.S.; "Performance Analysis and Investigation for the development of Energy Efficient Building", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017, 2017
42. Hoque, M. E., Nur, S. S., Ferdous, O. and Sultana, M.; "Investigation of the behavior of Mechanical Structures Due to Vibration Using ANSYS", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017, 2017
43. Rahman, A., Hoque, M. E., Nur, S. S., and Anam, M. S.; "Analysis of Machinery Health Considering the Parameters of Vibration in a Multi-Functioning Arrangement", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017, 2017
44. Hoque, M. E., Hasan, M.J., and Hasan; "Investigation of Welding Joint for Varying Current and Voltage to Minimize the Defect Using Non-Destructive Testing", In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID: 252, 20-22 December, 2017, 2017
45. M. Mourshed, Rashid, F., Sarker, A., Hoque, M. E., and Masud, M.; "Single Degree Motion Control Using Magnetic Levitation System", In CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Applied Sciences, MIST, Dhaka, Bangladesh, 22-23 February, 2017, 2017
46. M. B. Hossain and Hoque, M. E.; "Development of a Novel Magnetic Suspension System", 4th International Conference on Engineering Research, Innovation and Education 2017, SUST, Sylhet, Bangladesh, Paper ID. 267, 13-15 January, 2017, 2017
47. Roy, A., Islam, M.S., Hoque, M. E., Sarker, M.R.I.; "Experimental Investigation of single Pass Solar Air Heater with and without Square Steel Wire Mesh on Absorber Plate", in the CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Energy Engineering 2016, KUET, Khulna, Bangladesh, Paper ID. ICMIEE-PI-160378, 26-27 December, 2016, 2016
48. Roy, A., and Hoque, M. E.; "Performance Analysis of Double Pass Solar Air Heater With Packed Bed Porous Media in Rajshahi", in the CD-ROM Proceedings of the 7th BSME International Conference on Thermal Engineering 2016, BUET, Dhaka, Bangladesh, December, 2016, 2016
49. Hoque, M. E., Rashid, F., Saad, A.M., and Islam, M.; "A Vibration Control System Using Negative Stiffness Mechanism", In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 253, 18-20 December, 2015, 2015
50. Hoque, M. E., Biswas, S. and Khan, M. I.; "Optimization of Truss Structure Using Finite Element Analysis", In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 426, 18-20 December, 2015, 2015
51. Hoque, M. E., Rubel, R.I., Iqbal, M.J.; "Analysis of a CNG Auto Rickshaw Drive Shaft", in the CD-ROM Proceedings of the International Conference on Materials and Manufacturing Engineering 2015, IUT, Dhaka, Bangladesh, Paper ID. 125, 25-27 December, 2015, 2015
52. Hoque, M. E., Rubel, R.I., Iqbal, M.J., and Uddin, M.K.; "Prospect of Mild Steel as CNG Auto Rickshaw Drive Shaft", in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. MS-08, 11-13 November, 2015, 2015
53. Kabir, K. M. R., Arefin, S., Halder, P.K., Paul, N. and Hoque, M. E.; "Survey on Socio-economic Impact of Battery Operated Auto Rickshaw in Jessore City", in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. RT-67, 11-13 November, 2015, 2015
54. Zaman, A.S.M. S., Halder, P.K., Hoque, A.S.M.M., Islam, M.T. and Hoque, M. E.; "Renovation of Automation with Human Resources in Industrial Sector in Bangladesh", in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. IE-25, 11-13 November, 2015, 2015
55. Hoque, M. E., Biswas, A., Rashid, F., Saad, A. M., and Bir, P.; "Production of Electricity from Renewable Energy Sources for Home Appliances and Nano-Grid", In CD-ROM Proceedings of the 3rd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 26-29 December, 2015, 2015
56. A. H. Zaman, M. J. Hossen, Hoque, M. E. and S. Sarker; "Development of Programmable Logic Controller Based Self Controlled Egg Incubator", In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Energy Engineering, KUET, Khulna, Bangladesh, Paper ID: ICMIEE-PI-140266, 26-27 December, 2014, 2014
57. A. Rahman and Hoque, M. E.; "Harvesting Energy from Sound Using Electromechanical System", In CD-ROM Proceedings of the 2nd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-121, 24-27 December, 2013, 2013
58. Hossain, M. B., Hoque, M. E., Zaved, A., Islam, Z., and Kader, M. A.; "Extracting Energy from Revolving Doors", in CD-ROM Proceedings of the 2nd International Conference on Mechanical, Industrial and Energy Engineering 2012, KUET, Khulna, Bangladesh, Paper MIE-12-074, 1-2 February, 2013, 2013
59. Hoque, M. E., and Rashid, S. M.; "Development of an Automatic Humidity Control System", in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2013, RUET, Rajshahi, Bangladesh, Paper ID. AM-20, 1-3 November, 2013, 2013
60. M.A. Kader, Raju Ahamed, M.A. Rahim, B.K. Das, M.E. Hoque, S.M.N. Hoque, S.M. Rasid; "Design, construction and performance test of a portable solar cooker", in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2013, RUET, Rajshahi, Bangladesh, Paper ID. ET-29, 1-3 November, 2013, 2013
61. Hoque, M. E., A. Sarker and M. Mourshed; "Motion Control of a Magnetically Suspended Object by PD Controller", In CD-ROM Proceedings of the 2nd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-127, 24-27 December, 2013, 2013
62. A. Rahman and Hoque, M. E.; "Prospects of Harvesting Energy from Vibration in Bangladesh", In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 292, 20-21 December, 2013, 2013
63. Hoque, M. E., and Hossain, M. B.; "Generation of Electricity from Speed Breaker", in CD-ROM Proceedings of the International Conference on Education, Research and Innovative Engineering 2013, Sylhet, Bangladesh, 11-13 January, 2013, 2013
64. Hoque, M. E., Hossain, M. B. and Kader, M. A.; "Electrical Energy Harvesting from Speed Breaker", in CD-ROM Proceedings of the International Conference on Electrical, Computer and Telecommunications Engineering 2012, RUET, Rajshahi, Bangladesh, pp. 617-620, 28-29 December, 2012, 2012
65. Hoque, M. E., Saha, D. K. and Islam, M. R.; "Development of a Temperature Control System Using Programmable Logic Controller", in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. AM-13, 28-29 September, 2012, 2012
66. Rahim, M. A., Kader, M. A., Hoque, M. E., Rifat, M. A. A., Hasan, S. M.; "Design and Construction of an Automatic Water Tap", in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. AM-09, 28-29 September, 2012, 2012
67. Hossain, M. B. and Hoque, M. E.; "Harvesting Energy From Spinning Doors", in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. ET-05, 28-29 September, 2012., 2012
68. Halder, P. K., Paul, N. and Hoque, M. E.; "Municipal Solid Waste Management and Characterization in Rajshahi City of Bangladesh", in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. ET-06, 28-29 September, 2012, 2012
69. Hoque, M. E. and Hossain, M. B.; "Harvesting Energy From Speed Breaker", in CD-ROM Proceedings of the 5th BSME International Conference on Thermal Engineering, IUT, Gazipur, Bangladesh, Paper ID. 181, 21-23 December, 2012, 2012
70. Hoque, M. E. and Paul, N.; "Inventory Management of Pharmaceutical Industries in Bangladesh", in CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper no. ICME11-RT-049, 18-20 December, 2011, 2011
71. Hoque, M. E., Choudhury, T. T. and Newaz, A. A. R.; "Automatic Priming of Centrifugal Pump", in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-027, 22-24 December, 2011, 2011
72. Paul, N., Choudhury, T. T. and Hoque, M. E.; "RFID Technology in Pharmaceutical Inventory Management", in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-153, 22-24 December, 2011, 2011
73. Joardder, M. U. H., Kabir, M. M., Barua, R. and Hoque, M. E.; "Loss to Assets: Production of Power from Speed Breaker", in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-065, 22-24 December, 2011, 2011
74. Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M.; "Development of a Multi-Degree-of-Freedom Vibration Isolation System Using Parallel Mechanism", in CD-ROM Proceedings of the 17th International Congress on Sound and Vibration (ICSV17), Cairo, Egypt, paper no. 876, 18-22 July, 2010, 2010
75. Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M.; "Application of feedforward control to a Vibration Isolation System Using Negative Stiffness Suspension", in the CD-ROM Proceedings of the 10th International Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan, paper no. 10058, 17-20 August, 2010, 2010
76. Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M.; "A Parallel Mechanism Based Vibration Isolation System Using Negative Stiffness", in Proceedings of the 2010 IEEE International Conference on Measurement and Control Engineering (ICMCE2010), Chengdu, China, paper no. W30034, pp. 672-676, 16-18 November, 2010, 2010
77. Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M.; "A Modular-Type Three-Axis Vibration Isolation System Units Using Negative Stiffness", in CD-ROM Proceedings of the 2010 ASME Dynamic Systems and Control Conference (ASME-DSC), Cambridge, Massachusetts, USA, paper no. DSCC2010-4128, 13-15 September, 2010, 2010
78. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "A 3-DOF Modular Vibration Isolation System using Zero-Power Magnetic Suspension with Adjustable Negative Stiffness", in Proceedings of the IEEE 11th International Workshop on Advanced Motion Control, Nagaoka, Japan, paper no. NF-003107, pp. 661-666, 21-24 March, 2010, 2010
79. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "An Application of Nonlinear Compensation to Six-Axis Vibration Isolation System Using Zero-Power Control", in CD-ROM Proceedings of the Sixteenth International Congress on Sound and Vibration (ICSV16), Krakow, Poland, Paper no. 671, 5-9 July, 2009, 2009
80. Hoque, M. E., Mizuno, T, Shahadat, M. M. Z., Ishino, Y. and Takasaki, M.; "A Vibration Isolation System Using Stiffness Variation Capability of Zero-Power Control", in CD-ROM Proceedings of the International Conference on Mechanical Engineering 2009 (ICME2009), Dhaka, Bangladesh, paper no. ICME09-AM-20, 26-28 December, 2009, 2009
81. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M.; "Development of a Module-type Vibration Isolation System Using Zero-Power Control", in Proceedings of the First Japan-Korea International Joint Symposium on Dynamics and Control in Dynamics and Design Conference (J-K Symposium/DDC), Hokkaido, Japan, Paper no. J17, 4-6 August, 2009, 2009
82. Shahadat, M. M. Z. and Hoque, M. E.; "Making Biodiesel and Performance Test of a Diesel Engine Using Diesel -Biodiesel Blends as a Fuel with Inlet Air Preheating Attachment", in CD-ROM Proceedings of the International Conference in Mechanical Engineering 2007 (ICME2007), Dhaka, Bangladesh, paper no. 103 (ICME07-Th-14), 30 December 2007-1 January 2008, 2008
83. Hoque, M. E., Mizuno, T., Takasaki, M., and Ishino, Y.; "Horizontal Motion Control in a Six-Axis Hybrid Vibration Isolation System using Zero-Power Control", in CD-ROM Proceedings of the 12th Asia Pacific Vibration Conference 2007, Sapporo, Japan, paper no. 154, 6-9 August, 2007, 2007
84. Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki; "An Active Zero-Power Control with a Passive Technique for Vibration Isolation System", in CD-ROM Proceedings of the IEEE International Conference on Industrial Technology, Mumbai, India, paper ID. IF-006203, pp. 1309-1314, 15-17 December, 2006, 2006
85. Hoque, M. E. and Mizuno, T.; "An Active Control of Vibration Isolation System Using Zero-Power Magnetic Suspension", in CD-ROM Proceedings of the ASME International Student Conference 2006, Istanbul, Turkey, May 26-28, 2006, 2006
86. Mizuno, T., Kishita, D., Hoque, M. E., Takasaki, M., and Ishino, Y.; "Vibration Isolation System using Zero-power Magnetic Suspension with a Weight Suspension Mechanism", in CD-ROM Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, paper ID. 02625, 4-8 July, 2005, 2005
87. Hoque, M. E., Kamiya, T., and Mizuno, T.; "A Nonlinear Compensator for Zero-Power Control and Its Application to Vibration Isolation System", in CD-ROM Proceedings of the 2005 ASME/IEEE International Conference on Mechatronic and Embedded Systems and Application (IDETC/CIE 2005), Long Beach, California, USA, paper no. DETC2005-85175, 24-28 September, 2005, 2005
88. Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T.; "An Active Microvibration Isolator with Magnetic Suspension Technology", in Proceedings of the First International Symposium on Advanced Technology of Vibration and Sound, Hiroshima, Japan, Paper no. 221, pp. 299-304, 1-3 June, 2005, 2005
89. Hoque, M. E., Kamiya, T., Takasaki, M., Ishino, Y. and Mizuno, T.; "A Nonlinear Compensator for Zero-Power Control System", in CD-ROM Proceedings of the International Conference on Instrumentation, Control and Information Technology, Okayama, Japan, pp. 2273-2278, 8-10 August, 2005, 2005
90. Hoque, M. E., Kishita, D., Takasaki, M., Ishino, Y. and Mizuno, T.; "Vibration Isolation System Using Zero-Power Magnetic Suspension (Experimental Study on System with a Weight Support Mechanism)", in Proceedings of the Dynamics and Design Conference 2005 and 9th Motion and Vibration Control Conference (MOVIC), Niigata, Japan, Paper no. B33, pp. 340-344, 23-25 August, 2005, 2005
91. Ishigami, T., Takasaki, M., Ishino, Y., Hoque, M. E., Mizuno, T. and Toumia, T.; "Proposal of An Active Vibration Isolation System with a Parallel Mechanism Using Zero-Power Magnetic Suspension", in CD-ROM Proceedings of the 7th International Conference on Motion and Vibration Control (MOVIC 2004), St. Louis, USA, paper no. 134, 8-11 August, 2004, 2004
92. Kishita, D., Takasaki, M., Ishino, Y., Hoque, M. E., and Mizuno, T.; "Introduction of Weight Support Mechanism to Vibration Isolation System Using Zero-Power Magnetic Suspension", in CD-ROM Proceedings of the 7th International Conference on Motion and Vibration Control (MOVIC 2004), St. Louis, USA, paper no. 133, 8-11 August, 2004, 2004
93. Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T.; "Design of a Mode-Based Controller for 3-DOF Vibration Isolation System", in CD-ROM Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, Singapore, pp. 478-483, 1-3 December, 2004, 2004
94. Hoque, M. E., Huang, X. Y. and Yap, F. F.; "Feedback Control of Rotating Disk Flutter: An Experimental Approach", in Proceeding of the of 13th ASME Information Storage and Processing System Conference (ISPS), Santa Clara, California, USA, 17-18 June, 2002, 2002
95. Hoque, M. E., Huang, X. Y. and Yap, F. F.; "An Active Technique for Controlling Disk Flutter in Hard Disk Drive", in Proceedings of the 2nd World Engineering Congress, Sarawak, Malaysia, pp. 357-360, 22-25 July, 2002, 2002
96. Huang, X. Y., Hoque, M. E., Wang, X. Z. and Yap, F. F.; "A Feedback Control System for Suppressing Rotating Disk Flutter in Hard Disk Drives", in Proceeding of the IEEE Asia Pacific Magnetic Recording Conference (APMRC), Singapore (invited paper), pp. AA5-01- AA5-02, 28-29 August, 2002, 2002

Bibliography Text

Books (3)

Book Chapters (2)

Journal Articles (42)

Conference Papers (96)

RUET Contact Information